Ultraflex Group

T-Rack, Dual T-Rack, Synchro T-Rack

T-Rack, Dual T-Rack, Synchro T-Rack Electric rack actuators Electric systems

T-Rack, Dual T-Rack, Synchro T-Rack

• 12 mm square rack transmission.

• Supplied with 1,5 m cable. 

• Available end brackets or sliding brackets (to be ordered separately); the dovetail slide allows the fixing on the whole length of the Rack actuator.

• 24 Vdc version is suitable for installation on Smoke and Heat Exhaust Ventilators (SHEV) in conformity to European Standard EN 12101-2.

• Available on request: 

- 1200 mm stroke 

- F-SIGNAL versions with opening and closing feedback signal (free potential, maintained contact), activated by the current limit.

 

MULTIPLE SYSTEMS

• For large domes/top hinged windows or to provide more stability, the Rack actuator can be used in the Dual T-Rack version, providing two push points on the same vent. For each system assembly are necessary 1 Rack actuator, 1 Rack group, 1 connecting rod and 2 end brackets (part No. 41760Y)

• Fo r special multiple application when speed synchronization or more power is required, max 4 actuators Synchro T-Rack can be used, each one providing 1000 N force. Synchro T-Rack version is equipped with an integrated speed synchronization control board, avoiding the installation of an external control box

 

SPECIFICATION PROSPECTS

T-RACK

Electric linear actuator Ultraflex Control Systems. Available strokes 350, 550, 750 or 1000 mm. Voltage supply: 230 Vac or 24 Vdc. Electronic

safety limit stop and electronic stop in the intermediate positions. Parallel connection. Color: silver anodized. Force 1000 N

T-Rack 230 Vac and T-Rack 24 Vdc are conform to 2004/108/CE directive, the 230 Vac version is also conform to 2006/95/CE directive.

DUAL T-RACK

System assembly with two push points composed by one T-Rack Actuator, one T-Rack Group and a connecting rod. Force 1000 N

SYNCHRO T-RACK

Electric linear actuator Ultraflex Control Systems with integrated speed synchronization control board, for two or more push points without connecting rod. Force 1000 N each actuator.


T-RACK 230 V AC

VOLTAGE SUPPLY 230 Vac +/- 10%
ELECTRIC CONNECTION 3 wires + earth
OPERATION -
FORCE IN PUSH ACTION 1000 N
FORCE IN PULL ACTION 1000 N
SPEED -12,5 mm/s
CURRENT ABSORPTION (with max load) 0,22 A
PARALLEL CONNECTION YES
LIMIT STOP Electronic
SAFETY STOP Electronic
FEEDBACK SIGNAL -
PROTECTION CLASS IP65

 


Part No. Model Description
41740E Stroke 350 mm
41741F Stroke 550 mm
41742G Stroke 750 mm
41743H Stroke 1000 mm

T-RACK 24 V DC

VOLTAGE SUPPLY 24 Vdc +/- 10%
ELECTRIC CONNECTION 2 wires + signalling
OPERATION by polarity inversion
FORCE IN PUSH ACTION 1000 N
FORCE IN PULL ACTION 1000 N
SPEED -12,5 mm/s
CURRENT ABSORPTION (with max load) 1,5 A
PARALLEL CONNECTION YES
LIMIT STOP Electronic
SAFETY STOP Electronic
FEEDBACK SIGNAL open/close
PROTECTION CLASS IP65

 


Part No. Model Description
41745J Stroke 350 mm
41746K Stroke 550 mm
41747L Stroke 750 mm
41748M Stroke 1000 mm

SYNCHRO T-RACK 24 V DC

VOLTAGE SUPPLY 24 Vdc +/- 10%
ELECTRIC CONNECTION 5 wires
OPERATION by polarity inversion
FORCE IN PUSH ACTION 1000 N
FORCE IN PULL ACTION 1000 N
SPEED -12,5 mm/s
CURRENT ABSORPTION (with max load) 1,5 A
PARALLEL CONNECTION YES
LIMIT STOP Electronic
SAFETY STOP Electronic
FEEDBACK SIGNAL -
PROTECTION CLASS IP65

 


Part No. Model Description
41750O Stroke 350 mm
41751P Stroke 550 mm
41752Q Stroke 750 mm
41753R Stroke 1000 mm

T-RACK GROUP


Part No. Model Description
41755T Stroke 350 mm
41756U Stroke 550 mm
41757V Stroke 750 mm
41758W Stroke 1000 mm

CONNECTING ROD


Part No. Model Description
40231B 1000 mm
40232C 1500 mm
40233D 2000 mm