Ultraflex Group

701Series battery distribution switches

701Series battery distribution switches Battery distribution switches Electrical components

701Series battery distribution switches

BEP MARINE BATTERY SWITCH TEST PROCEDURES (UL 1107) 

Continuous (1 hour) intermittent (5 minutes) and cranking (engine starting – 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested independently to this specification by a 3rd party laboratory.

 

701 BATTERY MASTER SWITCH - 63142 C

The 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the On or OFF position, however can be removed by
switching to an anti-clockwise 45° position. The control knob also features an interchangeable labelling system allowing a full range of applications Set-713 or Set-715. The 701 also features removable side plates on 4 sides for access of up to 1/0 cables. Plus a rear cover insulating the rear terminals against any short circuits
ensuring the switch meets ABYC requirements. The 701 can be either surface or recess mounted by cutting a 52 mm (2 1/16”) hole.

 

FEATURES:
• Continuous rating: 275 Amp DC
• Intermittent rating: 455 Amp DC
• Cranking rating: 1250 Amp DC
• Voltage rating: 48V DC
• Operation: ON/OFF
• Mounting: recessed or surface
• Termination stud size: 2 x 10 mm (3/8”)
• Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
• Tin plated copper studs and nuts
• Ignition protected

 

701-PM PANEL MOUNT BATTERY SWITCHES - 65494 X

Same specifications as 701 switch.