Ultraflex Group

Battery distribution switches

Battery distribution switches Battery distribution switches Electrical components

Battery distribution switches

701-S MINI BATTERY SELECTOR SWITCH - 64387 R

The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries. Please note this system will not separate electronics from harmful engine starting spikes.

 

FEATURES:
• Continuous rating: 200 Amp DC
• Intermittent rating: 300 Amp DC
• Cranking rating: 1000 Amp DC
• Voltage rating: 48V DC
• Operation: Selector 1-2-both-off
• Mounting: recessed or surface
• Termination stud size: 3 x 8 mm (5/16”)
• Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
• Tin plated copper studs and nuts

 

701S-PM PANEL MOUNT BATTERY SWITCHES - 66163 C

Same specifications as 701S switch.

 

721 BATTERY SELECTOR SWITCH - 63143 E

 The 721 is our heavy duty selector switch, housed in the same module as the 720 and includes the same removable plates and back cover. While BEP Marine foremost recommends isolated battery systems as
outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries. Please note this system will not separate electronics from harmful engine starting spikes.

 

FEATURES:
• Continuous rating: 350 Amp DC (between common and B1 or B2)
• Continuous rating: 500 Amp Dc (between common and B1 or B2)
• Intermittent rating: 500 Amp DC
• Cranking rating: 1500 Amp DC
• Voltage rating: 48V DC
• Operation: Selector – Battery 1-2-both off
• Mounting: recessed or surface
• Termination stud size: 3 x 10 mm (3/8”)
• Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches)
• Tin plated copper studs and nuts
• Ignition protected