702-MFH AND 702-HDBFH SINGLE FUSE HOLDER
BEP Marine's new heavy duty fuse holders are an economical way of fusing heavy loads 30-80 amp. Ideal for battery charger outputs or mains feeds. 6 mm (1/4") studs receive ring terminals and cables up to 25 mm² (4 gauge). Fuse is clamped between tinned brass clamp for positive connection. Covers enclose exposed terminals to meet ABYC standards.
702-MFH - 67406H Stud size: 6 mm (1/4") - Dimensions: 71x53x36 mm (2.8"x2"x1.42")
704-ANL FUSE HOLDER HEAVY DUTY - 63235K
The 704-ANL allows fusing of heavy duty accessories between 80 Amp. - 500 Amp. Mounted in contour lock mouldings with removable sides. Meets ABYC standards for exposed terminals.
The BEP ATC fuse holder includes the patented contour lock system (as used in all BEP battery management products). This allows you to module as many fuse holders as you like together.
The advantage of this is that it allows you to link the inputs together, or split them apart to allow multiple power groups within one fuse holder: eg. switched supply or 24 hour supply. For the aftermarket the modular system allows you to carry one part number instead of 3 or 4. The 6W-ATC also includes a clip on cover and label positions. The lebel positions receive the same label as the 1000 series panels: (ordered separately).
• Maximum amperage per circuit: 30 Amp
• Maximum amperage per block: 100 Amp
• Maximum voltage: 32V DC
• Base material: polycarbonate
• Cover material: clear polycarbonate
BB-LINK - 17 mm - 65570L
Fuse holder link to be ordered separately
HEAVY DUTY FUSE SPECIFICATIONS
- Fuses available 30-80 Amp
- Interrupt capacity: 1000 Amp DC
- Maximum voltage: 32 Volt DC
• Fuses available: 3-30 Amp
• Interrupt capacity: 1000 Amp DC
• Maximum voltage: 32 Volt DC