Ultraflex Group

UCS® - CRM control panel - Accessories

UCS® - CRM control panel - Accessories Electrical linear actuators and control panels

UCS® - CRM control panel - Accessories


Zoom
KP push button
  • KP push button
    KP push button
  • RC remote control
    RC remote control
  • Push button
    Push button
  • TH thermostat
    TH thermostat
  • RS rain sensor
    RS rain sensor
  • WS wind sensor
    WS wind sensor

KP PUSH BUTTON - 40770K

Using this push button it is possible to select and drive separately the four actuators or groups of actuators, or operate the four lines contemporary.

 

RC REMOTE CONTROL - 40771L

On the KP push button there is an infra-red receiver that allows the use of the RC remote control having the same functions of the push button. The remote control is supplied with a proper wall support.

 

PUSH BUTTON - 41013B

It is possible to operate manually all the actuators contemporary, connecting to the CRM a standard double push button with return spring. The closing and opening inputs are memorized for three minutes in order to allow also at the actuators with very long stroke to complete their movement.

 

The control panel is arranged for the connection of three sensors that control the weather events:

TH THERMOSTAT - 40675K

The thermostat, if present, has the priority on the manual control: if the temperature is superior to the set one, the windows open, if inferior the windows close; to disable the thermostat act on its selector. Particularly suitable for conservatories and mansards. Built in on/off switch.

 

RS RAIN SENSOR - 40450K

In case of rain, the rain sensor sends the signal for window automatic closing that is indicated by a red LED in front of the control panel; it is possible to disconnect this sensor acting on the on/off switch on the front of the control panel. Further to the sensor intervention it is not possible, without disabling this sensor, to control the actuators until 8 min. after the end of the event. A heating element prevents dew formation on the surface. Particularly suitable for roof windows and sloping top hinged windows.

 

WS WIND SENSOR - 37185V

It emits a variable signal according to the wind intensity and acts on the control panel as the rain sensors do. With reference to the anemometer, it is possible to choose, using a rotating selector with 10 positions, at which wind speed the control panel operates the closing. Selecting 0 the anemometer is disabled while positions from 1 to 9 correspond to Beaufort wind force scale.