Ultraflex Group

Integra EPS

Integra EPS ELECTRONIC STEERING SYSTEM

Integra EPS

FEATURES AND BENEFITS

• Improve driver experience with more features, better performance, and greater reliability.

• Satisfy ever increasing horsepower and higher torque.

• Address current applications where systems have reached their limit of capacity for flow at pressure.

• Resolve issues of power consumption, noise, thermo overload, and autopilot integration.

• Dramatically simplify installations, most notably dual stations.

• Eliminate hydraulic hoses forward of transom.

• A single power unit can manage up to three engine applications.

 

PERFORMANCE DATA

• Relief valve setting 1850 Psi.

• Flow at Pressure:

4.4 l/min flow @ 1200 Psi

3.4 l/min flow @ 1450 Psi

3.0 l/min flow @ 1900 Psi

• Controlled variables are the rpm (= flow) and the current draw (= power consumption).

• The system can be controlled to have a specific behavior, depending on engine rpm are low or when the vessel reaches a certain speed or when any other condition defined by the customer occurs.

 

Operating voltage 9.6V-15.6V
Max current draw 60A, up to 120A, firmware tunable
Temperature range -25°C / +77°C
Nominal voltage 12V
No load current 7A
Max flow 4800 cm3 @ 6MPa (60 bar - 870 PSI) (cw and ccw)
Relief valve 12 MPa (120 bar - 1740 PSI)
IP Ratinge IP67
Relevant legislation

UNI EN ISO 25197, UNI EN ISO 10592 (ABYC P21,P24, P27), IGNITION PROTECTED SAE J1171