Ultraflex Group

A94 Tie bar for twin outboard engine/single UC128-OBF or UC130-SVS cylinders

A94 Tie bar for twin outboard engine/single UC128-OBF or UC130-SVS cylinders Outboard steering systems HYDRAULIC STEERING SYSTEMS

A94 Tie bar for twin outboard engine/single UC128-OBF or UC130-SVS cylinders

• Suitable for applications with singleUC128-OBF or UC130-SVS front mount cylinder

NOTE: In the applications with dual cylinder use A90 tie bar for UC128-OBF and A95 tie bar for UC130-SVS

• Allows to tilt the engines independently

• Stainless steel components

• Electropolished stainless steel ball joints

• Not recommended for applications exceeding 500 HP

• 5 different lengths available:

A94 x 26 – 42448K - 26” (660,4 mm) twin engine centers

A94 x 28 – 42449M - 28” (711,2 mm) twin engine centers

A94 x 30 – 42450W - 30” (762,0 mm) twin engine centers

A94 x 32 – 42451Y - 32” (812,8 mm) twin engine centers

A94 x 34 – 42452A - 34” (863,6 mm) twin engine centers

 

A94 – 41204Z - adjustable from 26” to 37.4” (660 mm to 950 mm) engine centers

 

ATTENTION: As the tiller arm position varies from engine to engine and the distance between two engines is not predictable, unexpected interferences may occur while tilting. A duly check of the tie bar installation is then strongly recommended. Should you need additional information, please do not hesitate to refer to our Technical Service.