Ultraflex Group

Deep-pipe liquid level sensor

Deep-pipe liquid level sensor AcquaLink® - OceanLink VDO® - Marine instruments and sensors

Deep-pipe liquid level sensor

The VDO Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. 

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm. Make ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. 

• TE Superseal Connector IP67 

• Compensation chamber 

• Flange: PA66 GF30 

• Wiring harness with length of 200 mm 

• 3 signal ranges: 90–4 Ω, 0–180 Ω, 240–33 Ω 

• Lengh: 150 mm–1200 mm (every 10mm step) 

• Mounting diameter: 54 mm 

• IP67 protection rating 



Deep-Pipe Level Sensor, Safety Instructions, Installation Instructions, Installation Kit A2C17593300 



6 m Wiring Harness A2C17563000


For the identification of the codes, once the length and the desired signal are known, please refer your Uflex dealer.